+86-18958951029
HIGHSUN MEIDA M20CF
- Carbon fiber reinforced polyamide
- High stiffness and strength
- Excellent fatigue resistance
- ESD and conductive properties
- High heat deflection temperature
- Ideal for aerospace, automotive, and robotics
Product Overview
Highsun Meida M20CF is a carbon fiber reinforced polyamide (PA) designed to deliver exceptional stiffness, strength, and fatigue resistance. With a high specific strength and stiffness, it is well-suited for demanding applications such as aerospace, high-end automotive, and industrial robotics.
In addition to its superior mechanical properties, this material also offers electrical conductivity, making it ideal for ESD-sensitive components.
Key Properties
Carbon Fiber Reinforced for high strength and stiffness
Excellent Fatigue Resistance for long-lasting durability
Low Creep for stable performance under load
Electrical Conductivity for ESD-sensitive applications
High Heat Deflection Temperature for thermal stability
Lightweight yet strong, ideal for lightweighting applications
Typical Applications
Aerospace: Brackets, drone arms, and interior components
High-End Automotive: Structural brackets, performance parts, and lightweighting
Industrial Robotics: Lightweight, stiff arms and frames
ESD/Conductive Parts: Housings for sensitive electronics, fuel system components
Technical Data (Typical Values)
Physical Properties
| Property | Value | Test Standard |
|---|---|---|
| Density | 1.32 g/cm³ | ISO 1183 |
Mechanical Properties
| Property | Value | Test Standard |
|---|---|---|
| Tensile Strength | 180 MPa | ISO 527 |
| Flexural Modulus | 15,000 MPa | ISO 178 |
Electrical Properties
| Property | Value | Test Standard |
|---|---|---|
| Surface Resistivity | 10³ - 10⁶ Ohm/sq | IEC 60093 |
Thermal Properties
| Property | Value | Test Standard |
|---|---|---|
| Heat Deflection Temperature (1.8 MPa) | 215°C | ISO 75-2 |
| Melt Temperature | 270-300°C | — |
| Mold Temperature | 80-100°C | — |
Processing Notes
Drying Requirement: All polyamide materials are hygroscopic. They must be thoroughly dried before processing (typically 4-6 hours at 80°C for PA6, 4-6 hours at 100-120°C for PA66 in dehumidifying dryers) to a moisture content below 0.1-0.2%. Improper drying will cause significant property loss and surface defects.
Why Choose Highsun Meida M20CF
Superior Strength and Stiffness: Carbon fiber reinforcement provides excellent mechanical properties
Electrical Conductivity: Ideal for ESD-sensitive components
Fatigue and Creep Resistance: Durable and stable under long-term loading
High Heat Deflection Temperature: Suitable for high-temperature applications
Lightweight: Reduces weight in automotive and aerospace components