+86-18958951029
DAGU ABS DG-417K
- High flowability, suitable for fast injection molding
- Excellent mechanical strength with a tensile strength of 47.3 MPa
- Good impact resistance with an Izod notch impact strength of 208 J/m
- UL 94 HB flame retardant certification, meeting safety standards
- Reduced cycle times, improving productivity
Product Overview
DAGU ABS DG-417K is a high-impact, high-flow Acrylonitrile Butadiene Styrene (ABS) resin designed for injection molding. Offering excellent toughness, good surface finish, and ease of processing, this material is suitable for automotive parts, consumer electronics, appliances, and general-purpose components where durability and aesthetics are important.
Key Material Properties
| Property | Value | Test Standard |
Density (23°C) | 1.045 g/cm³ | ASTM D792 |
Melt Index (220°C, 10kg) | 18.5 g/10 min | ASTM D1238 |
Tensile Strength (1/8", 50 mm/min) | 510 kg/cm² | ASTM D638 |
Flexural Strength (1/8", 1.3 mm/min) | 770 kg/cm² | ASTM D790 |
Flexural Modulus (1/8", 1.3 mm/min) | 25180 kg/cm² | ASTM D790 |
Izod Impact Strength (1/8", 23°C) | 25 kg·cm/cm | ASTM D256 |
Elongation at Break (1/8", 50 mm/min) | 40 % | ASTM D638 |
Heat Deflection Temperature(1/8", 1.8 MPa) | 80 °C | ASTM D648 |
Vicat Softening Temperature (50°C/hr, 50N) | 99°C | ASTM D1525 |
Flame Rating (1/8") | HB | UL 94 |
Key Benefits
High Impact Resistance – Good Izod impact strength for toughness in demanding applications.
Excellent Flowability – High melt index supports fast filling and complex mold designs.
Good Stiffness & Strength – High flexural and tensile properties for structural integrity.
Good Surface Finish – Suitable for aesthetic parts requiring smooth appearance.
HB Flame Rating – Meets basic flammability requirements for many consumer and industrial uses.
Typical Applications
Automotive interior trim and components
Consumer electronics housings
Appliance parts and covers
Toys and recreational products
General-purpose injection molded parts
